How to carry out special maintenance of 3D steel wire bending equipment

Mechanical maintenance is a common topic, and proper maintenance also needs to be learned. Today we will show you the special maintenance of 3D steel wire bending equipment.

1. Running-in maintenance: The new or overhauled machine must be run-in maintenance during the running-in period. When the machine is used within the specified running-in period, the load and speed must be gradually increased according to the corresponding regulations, and the lubrication and tightening conditions must be checked comprehensively, and the condition of the whole machine should be observed. If any abnormality is found, it must be solved in time. The key point of running-in maintenance is to replace the lubricating oil of each part, lubricate each part, and tighten each bolt. Perform secondary maintenance after the break-in period.

2. Seasonal maintenance: Carry out maintenance on the machinery before summer or winter every year. The focus is on the fuel system, hydraulic system, cooling system and starting system. The following work needs to be done according to the actual situation: replace the fuel oil and hydraulic oil, adjust the relative density of the battery electrolyte, take cooling or cooling measures, and clean the cooling system.

3. Shutdown for maintenance: When mechanical equipment needs to be shut down for a period of time due to seasonal factors (such as winter vacation), it should be shut down for maintenance. Mainly do cleaning, shaping, matching, anti-corrosion and other work.

4. Storage and maintenance: Careful storage and maintenance should be carried out in accordance with storage requirements to reduce the erosion of long-term storage equipment by natural weather.

The above is about the special maintenance of 3D steel wire bending equipment, I hope to help you.